Holiday Tapestry Wall Décor using a Tassel Maker
ออกแบบโดย
Ayumi Sawai
ผลิตภัณฑ์
Materials
◆ For tassels
・No. 25 embroidery thread, red, 8 m
・No. 8 embroidery thread, red, as required
◆ For the tapestry section
・Linen fabric, 32 × 12 cm
・Embroidery thread
Red, as required
Lame thread (gold), as required
・Ric rac tape (5-mm width), 11 cm
・String to hang the tapestry, 50 cm
・1 Branch (about 16 cm long, with a diameter of about 7 mm)
วิธีทำ
*Please adjust the location where you stop sewing to suit the thickness of the branch.
Use the template to cut the fabric.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s2.jpg)
Transfer the design to the fabric and use the red thread to embroider. Sew the ric rac tape in the same position as shown in the picture.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s3.jpg)
Fold the seams to the rear and iron firmly.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s4.jpg)
Fold the fabric in half so that it faces externally, and leaving enough room for the branch to pass through, sew all around, about 5 mm from the edge.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s5.jpg)
Prepare the string for hanging the tapestry. Pass the string through the areas you just left unsewn, then tie its ends together.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s6.jpg)
Pass the branch through the same section as the string.
Set the Tassel Maker (small) to 3. Wind the embroidery thread onto the tassel maker 8 times to make a tassel of about 3 cm. Use the No. 8 embroidery thread to make a cord for the tassel by tying it into a loop.
*Make it so that the cord extends about 1 cm from the tassel.
![picture](https://www.clover-mfg.com/wp-content/uploads/2023/12/Holiday-Tapestry-Wall-Decor-using-a-Tassel-Maker_s8.jpg)
To finish, sew a tassel to each of the three spots shown in the picture.